5% off for Jichai 500kw G12V190zldt-2 Natural Gas Generator

• Customization: Available
• Output Type: DC
• Gas Source: Natural Gas
• Model NO.: G12V190ZLDT1-2
• Power: ＞200kW
• Standard: Standard
• Transport Package: Wooden Cases
• Specification: 118
• Trademark: jichai
• Origin: China
• HS Code: 8409999000
• Production Capacity: 50000pecises/Year
• Package Size: 512.00cm * 204.00cm * 280.00cm
• Package Gross Weight: 11800.000kg

Product Description

ENGINE SPEC IFICATIO NS
V-12, 4-Stroke-Cycle-Engine (190 series)
Bore 190mm
Stroke 215mm
Displacement --73.15L
Aspiration T urbocharged-After cooled
Speed Control Electronic Speed governing
Rated Speed 1200rpm
Rated power 550kW
 

INTRODUCTION
Series 190 inner mixing gas engine is developed by our company to meet the requirement of market. The whole engine is optimized by amending the shortages of the first gas engine generation. The power performance, fuel economy and reliability of this gas engine are improved a lot by adopting inner mixing mode, increasing compression ratio and boost ratio, enhancing swirl rat io, realizing lean -burnt by controlling air fuel ratio, using high-energy ignition, and etc.
This engine series is mainly used in generating by single engine or several engines forming a power station. It also can be used as power of compressor, oil t ransfer pump, water in jection pump, and etc.
MAIN FEATURES
 

Engine Design Designed by AVL, Austria Intellectual Property belong to JCPC Longer Stroke, More displacement Low Speed (1200RPM), More Reliable Advanced World Standard Performance Generator - Brushless Excitation -AVR Better Insulation and Protection Safety Low Oil Pressure Auto Stop Protection Over Speed Auto Stop Protection Exp losion Proof High Coolant Temperature Alarm Low Coolant Level Alarm High Oil Temperature Alarm Complete Electrical Protection Emergency Stop Device

Testing Strict Inspection and Factory Test for Each Gen-set Start Performance Test Load Test Synchronization Test Safety System Test The Whole Equipment Supply Standard Scope of Supply Optional Equipment List Repairing Tools Spare Parts Meet the Requirement for All Accessories of Project Easy Installation and Remove All Equipment on Common Skid Three -Point Support -Simple Installation Work High Strength Skid, for Hoisting and Removing. Technic al Support & Ser vices Free Technical Support and Training Service 24/7 Technical Service Tel Number Rapid Spare Parts Supply After Sales Service for Generator Set Lifetime

 

  Property Parameter Table
 

Model	500GF-T1
Engine type	G12V190ZDT1-1
Alternator type	1FC series(SIEMENS technology)
Rated Power * kW	500
Rated Speed rpm	1200
Rated Frequency Hz	60
Rated Voltage V	480
Rated PF	0.8
Vo ltage Regulation	AVR
Cooling Method	Closed cooling
Weight kg	13800
Dimension mm	6200x2330x2778

*Rating and fuel consumption based on ISO Standard conditions (Ambient temperature at 25 degree Centigrade, Atmospheric pressure at 100kPa and Relative humidity at 30%). Site rat ing and fuel consumption should amend according to relative standard (The table at right side for reference )
Main Specification of Engine

Model of engine	G12V190ZDT1-1
Rated Power(kW)	550kw
Rated Speed(r/ min)	1200
No. and layout of cylinders	12-cylinder,60°Vee
Type	Four stroke, Water cooled, Direct in jection, Air-fuel ratio control, Spark plug ignition, Out mixing, Electrical control, Mixed after compressor, Turbocharged and aftercooled.
Heat consumption	≤11386kJ/kW·h
Specific oil consumption (g/kW.h)	≤1.63
Bore(mm)	190
Stroke (mm)	215
Total displacement (L)	73.15
Governor	Electronic Governor
Exhaust temperature (before turbo)	≤680ºC
Starting mode	24V DC electric starting motor
Direction of rotation	Counter-clockwise(facing to flywheel)
Lubrication method	Pressure and splash lubrication
Hot water outlet temperature	<90ºC
Mid-cooler inlet water temperature	<45ºC
Oil temperature	<90ºC
Stable regulating rate	0~5 % adjustable
Oil brand	Mobil Pegasus MOBIL610
Cooling method	Forced water cooling
Manufacturer	CNPC Jichai Power Co., Ltd

Main Specification of Alternator

Model of alternator	1FC series(siemens technology)
Rated power(kW)	500

 

 

Rated voltage(V)	400
Coupling	Elastic
Voltage regulator	3 phase sensing with volts/60Hz.
Voltage regulation	Less than +/-0.5% in steady stat60e and less than +/- 0.5% with 3% speed change.
Rated voltage	480 V
Rated frequency	60Hz
Power factor	COS¢=0.8
Efficiency	93.5 %
Wiring mode	Three-phase four-wire system(Y)
Excitation mode	Brushless excitation
Insulation class	F
Running mode	Continuous
Protective class	IP23
Cooling mode	Fans self-ventilation
Weight	2700kg
Rotary inertia	19kgm^2
Altitude	≤1000m
Rotating direction	Anticlockwise(Facing to input end)
Generator outline direction	Right(Facing to shaft stretch direction)

STANDARD SCOPE OF SUPPLY
 

Natural Gas Engine Air inlet system Air filter Air cooler Bracket Control system Run/Auto/Stop control Governor Mechanic instrument Control Panel Explosion Proof Safety protection system Exhaust system Exhaust gas turbocharger Exhaust manifold

Electric Starter 24 Volt Lubricating System Main oil pump Lube oil filter Lube oil cooler Lube oil Centrifugal filter Cooling System Cooling fan and Driven device Level gauge Alternator Brushless excitation alternator AVR(digital mode) Spares Normal repair tools Special spare parts

 

Corrugated pipe Exhaust pipe Exhaust elbow Exhaust silencer Starting System DC starting motor

Technical document Others Common skid Elastic coupling

Jinan Guohua Green Power Equipment Co.,Ltd(JNGH),is a high-tech sales &service company of Jinan Diesel Engine Co., Ltd. Established in 2010,JNGH has formed a complete system in sales and after-sales of 190 series engine(jichai brand:6L190,8V190,12V190.16V190) 
Main business scope:
Early stage:Consultation,designation, supply and erection of engine-based power plants,including diesel generator,natural gas generator,coal gas generator and biogas generator.
Mid stage:Parts supply of jinan diesel engine(jichai/chidong brand).JNGH has two warehouses.One located in Jinan which supply the domestic north and south market.One located in Xinjiang province which supply the west market.Thus could delivery parts fast and guarantee the quality.

Later stage:JNGH also offer engine overhaul and maintenance service.With experienced engineer and professional skills,the problems could be easy solved.Not only the domestic China,Ghana,Kazakhstan,Vietnam and Myanmar also could see the trace of JNGH.

Item (2 lot)	Description
1	PLUG SPARK (127)
2	CYLINDER HEAD ASSEMBLY IS THIS COMPLETE HEADS READY TO INSTALL ; Part Number: 127.03.00B; Manufacturer: CHIDONG
3	Ignition switch assembly for Chidong p/n 127.90.40
4	Copper core Soft wire for Chidong p/n BRV-1X1.5, 6m
5	WIRE, HIGH TENSION SUBASSEMBLY; Part Number: 127.90.10; Manufacturer: Jinan Diesel Engine Co., Ltd.
6	PLUG SPARK; Part Number: 807BEX13.5; Manufacturer: YANCHENG CITY XINDE PETROLEUM MACHINERY PLANT,CHINA
7	IGNITION COIL; Part Number: 127.90.60; Manufacturer: Jinan Diesel Engine Co., Ltd.
8	WIRE, LOW TENSION SUBASSEMBLY; Part Number: 127.90.20; Manufacturer: Jinan Diesel Engine Co., Ltd.
9	Right wire tube for Chidong p/n127.90.01
10	Left wire tube for Chidong p/n 127.90.02
11	VALVE EXHAUST; Part Number: 12VB.03.22; Manufacturer: NO MANUFACTURER CODE
12	VALVE, INTAKE; Part Number: 12VB.03.37A; Manufacturer: Jinan Diesel Engine Co., Ltd.
13	CYLINDER LINER; Part Number: 12V.01.02C; Manufacturer: CHIDONG
14	CYLINDER SLEEVE WATER SEAL; Part Number: 12VB.01.136; Manufacturer: CHIDONG
15	SEAL RING UPPER RUBBER CYLINDER HEAD; Part Number: 12VB.01.134; Manufacturer: NO MANUFACTURER CODE
16	SEAT, EXHAUST VALVE; Part Number: 127.03.80.05; Manufacturer: Jinan Diesel Engine Co., Ltd.
17	VALVE, INTAKE SEAL; Part Number: 127.03.80.04; Manufacturer: Jinan Diesel Engine Co., Ltd.
18	O-RING, SET PISTON (FIRST RING); Part Number: 12VB.05.09B&12VB.05.11&12VB.05.20; Manufacturer: CHIDONG
19	PISTON ; Part Number: 127.05.01A; Manufacturer: CHIDONG
20	PISTON PIN ; Part Number: 12V.05.08A; Manufacturer: CHIDONG
21	RETAINING RING; Part Number: 12V.05.14; Manufacturer: CHIDONG
22	BUSHING, SET OF UPPER CONNECTING ROD; Part Number: 12VB.05.10.05&12VB.05.10.04; Manufacturer: CHIDONG
23	BUSHING, SET OF UPPER CONNECTING ROD; Part Number: 12VB.05.10.05&12VB.05.10.04; Manufacturer: CHIDONG
24	RUBBER RING FOR CHIDONG GAS ENGINE; Part Number: 161.44.11; Manufacturer: Jinan Diesel Engine Co., Ltd.
25	SUBASSEMBLY, SPARK PLUG FOR CHIDONG GAS ENGINE; Part Number: 127.90.50A; Manufacturer: Jinan Diesel Engine Co., Ltd.
26	PUMP WATER ASSEMBLY; Part Number: 129.22.00; Manufacturer: CHIDONG
27	AIR STARTING MOTOR; Part Number: 701.46F.60; Manufacturer: NO MANUFACTURER CODE
28	EXHAUST FLEX FOR NATURAL GAS ENGINE 12V 190ZDT-2;Part Number: 398.09.50; Manufacturer: CHIDONG
Item(1st lot)	Description
1	WIRE, HIGH TENSION SUBASSEMBLY; Part Number: 127.90.10; Manufacturer: Jinan Diesel Engine Co., Ltd.
2	IGNITION COIL; Part Number: 127.90.60; Manufacturer: Jinan Diesel Engine Co., Ltd.
3	WIRE, LOW TENSION SUBASSEMBLY; Part Number: 127.90.20; Manufacturer: Jinan Diesel Engine Co., Ltd.
4	VALVE, INTAKE; Part Number: 12VB.03.37A; Manufacturer: Jinan Diesel Engine Co., Ltd.
5	SEAT, EXHAUST VALVE; Part Number: 127.03.80.05; Manufacturer: Jinan Diesel Engine Co., Ltd.
6	VALVE, INTAKE SEAL; Part Number: 127.03.80.04; Manufacturer: Jinan Diesel Engine Co., Ltd.
7	RUBBER RING FOR CHIDONG GAS ENGINE; Part Number: 161.44.11; Manufacturer: Jinan Diesel Engine Co., Ltd.
8	SUBASSEMBLY, SPARK PLUG FOR CHIDONG GAS ENGINE; Part Number: 127.90.50A; Manufacturer: Jinan Diesel Engine Co., Ltd.