| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Standard Component: | Standard Component |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product details: |
| Technical parameters of 500KW gas generator set 12V190 |
| Unit model: 500GF-WK2 |
| Rated power: 500KW |
| Rated voltage: 400V |
| Rated current: 902A |
| Rated frequency: 50Hz |
| Rated power factor: COSφ=0.8 (hysteresis) |
| Excitation mode: brushless |
| Wiring mode: star three-phase four-wire |
| Start mode: DC 24V electric start |
| Control mode: remote electric control |
| Connection mode: elastic coupling |
| Cooling method: semi-open double temperature forced water cooling |
| Lubrication mode: pressure lubrication and splash lubrication |
| Oil brand: Kunlun 15W40CD special oil or equivalent technical specification lubricating oil |
| Crankshaft steering (viewed from the flywheel end) : counterclockwise |
| Dimensions: 5120×2040×2780 |
| Unit quality: 12500kg |
| Generator Technical Parameters: |
| Motor model 1FC6 455-6LA42 |
| Rated capacity 625KVA |
| Rated voltage 400V |
| Rated current 902A |
| Rated frequency/speed 50Hz/1000r/min |
| Rated power factor 0.8(hysteresis) |
| Brushless excitation mode (built-in AVR, adjustable DROOP) |
| Wiring mode star three-phase four-wire |
| Insulation class F |
| Protection level IP23 |
| Support structure double side single bearing |
| No-load voltage adjustment range is 95 ~ 105% |
| Gas quality requirement: |
| Gas engine fuel is mainly natural gas, but also can use oil field associated gas, liquefied petroleum gas, biogas and other flammable gases.The gas used should be dried and dehydrated to free water, crude oil and light oil, and its low calorific value should not be less than 31.4 MJ /m³, the total sulfur content should not be more than 480mg/m³, and the hydrogen sulfide content should not be more than 20mg/m³.In addition, the air source pressure should be in the range of 0.05~0.30MPa. |
){kind=link}