Qsk60g 1540kw/1925kVA Gas Generator Sets 1000kw/1160kw/1200kw/1400kw/1500kw Gas Standby Generator Sets

Product Description

Performance characteristics 

The QSK60G is an energy efficient gas generator series that offers a full range of gas generator features and innovative gas technology for mains and peaking power applications.

With more than 2GWE generators installed worldwide, the QSK60G family of gas-fired generators has a proven track record of success. The generators offer excellent fuel efficiency and reliability, low maintenance costs and low total cost of ownership.

Low emissions: 
thin combustion technology enables NOx emissions as low as 250mg/Nm3 (0.5g/hp-hr).

High Efficiency: 
State-of-the-art thin-burning engine utilizes Miller recirculation combustion and a full-authority electronic engine management system, resulting in low emissions and up to 43.8% efficiency.

Control System Integration: 
PowerCommand 3.3 genset controllers are standard and provide full genset system integration, including full paralleling capability in grid or load sharing mode, precise frequency and voltage regulation, alarm and status message displays, AmpSentry™ protection, output metering, automatic shutdown on fault detection, and a genset-mounted user interface panel mounted on the generator set. A remote operator panel is also available as an option.

Cooling System: 
The genset can be connected to a remote radiator or heat exchanger.

1. Cylinder block: made of high-strength alloy cast iron, with good rigidity, low vibration and low noise.
2. Cylinder head: four-valve design for each cylinder, optimized air/fuel mixing ratio, effective improvement of combustion and emission; one cover for each cylinder, easy maintenance.
3. Camshaft: Single camshaft can precisely control the valve and injection timing, and the cam profile can reduce the impact force and improve reliability and durability.
4. Crankshaft: Integral crankshaft made of high-strength forged steel, the rounded corners and the induction quenching process of the journals can ensure higher fatigue strength of the crankshaft.
5. Piston: Adopting the latest aluminum alloy casting technology, the ω-type head and barrel-type skirt design can compensate for thermal expansion and contraction to ensure a good fit.

Specification

Genset Model   GHC1540N5C
Prime Power     1400kw/1750kva
Engine Model     QSK60G

Motor type: Gas 
Phase type: 3-phase 
Mobility: Stationary 
Frequency: 50 Hz, 60 Hz 
Fuel system: Direct fuel injection 
Cooling system: Air-cooled 
Application: Cogeneration, for mines, industry 
Options and accessories: EU class IIIA compliant 
Voltage: 
 min: 380V 
 max: 11,000 V 
Speed: 
 min: 
 13,924 rpm (87,487 rad. .min-1) 
 1,500 rpm (9,425 rad.min-1) 
 max: 
 15,625 rpm (98,175 rad.min-1)

1540KW OEM generator set

1. Its highly efficient engine and stable power generation system ensure a continuous and stable power supply, which greatly enhances the working efficiency.
2. The genset adopts an advanced control system that can realize automatic startup and shutdown, making the operation more convenient and safe.
3. The generator set also has intelligent energy-saving function, which can automatically adjust the power output according to the actual load, minimize the waste of energy and meet the requirements of energy saving and environmental protection.
4. The generator set is equipped with perfect safety protection devices, such as overload protection, short-circuit protection, etc., which can effectively prevent equipment damage and safety accidents, ensuring the safety of equipment and personnel.

Details

Valve

Details

Technical Specifications

(Custom configurations available upon request.)

Genset Model	Power (50HZ)		Engine Model
	kW	kVA
GHC995N5C	995	1244	QSK60G
GHC1160N5C	1160	1450	QSK60G
GHC1200N5C	1200	1500	QSK60G
GHC1400N5C	1400	1750	QSK60G
GHC1540N5C	1540	1925	QSK60G
GHC1600N5CD	1600	2000	HSK78G
GHC1800N5CD	1800	2250	HSK78G
GHC2000N5CD	2000	2500	HSK78G
Genset Model	Power (60HZ)		Speed (rpm)
	kW	kVA
GHC1000N6C	1000	1250	1800
GHC1100N6C	1100	1375	1800
GHC1400N6C	1400	1750	1800
GHC1600N6CD	1600	2000	1509
GHC1800N6CD	1800	2250	1509
GHC2000N6CD	2000	2500	1509

Standard configuration 

Engine part: engine, diesel filter, air filter, oil filter, charger, starter motor.
Generator part: generator, air switch.
Control system: LCD liquid crystal digital display controller, electronic governor.
Other parts: water tank radiator, steel base, vibration damping pad.
Accessory parts: muffler, battery, battery cable, oil, anti-vibration pad.
 
Optional Configurations 
 
Auxiliary systems: Water jacket heater Oil heater Anti-condensation heater Oil-water separator Day tank
Distribution system: Double power conversion cabinet, parallel cabinet, grid cabinet, grounding resistor, DC panel, PT cabinet

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

Jinan Guohua Green Power Equipment Co.,Ltd(JNGH)

Jinan Guohua Green Power Equipment Co., Ltd. was founded in 2010, after fifteen years of development, has formed a complete diesel generator sets (multi-brand, support OEM), gas generator sets (natural gas, biogas, companion gas, etc.), 190 series engine (Jichai brand: 6L190, 8V190, 12V190, 16V190) sales and after-sales service system.
 
Main Business Scope 
Pre-phase: Consultation, design, supply and installation of engine power plants such as diesel generator sets, natural gas generator sets, gas generator sets, biogas generator sets, etc.
 
Mid-term: supply of spare parts for Jinan diesel engines (Cummin/Jichai/Chidong brand/Weichai/AB) JNGH has two warehouses, one located in Jinan to supply the domestic market in the north and south, and the other located in Xinjiang to supply the western market, so it can deliver the spare parts quickly and guarantee the quality.
 
Post: JNGH also provides engine overhaul and maintenance services, with experienced engineers and specialized technology, it can easily solve all kinds of problems.

FAQ

Q: What's the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: Can I request a customized size?
A: Absolutely! We offer tailored attachments.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.