| Certification: | ISO9001 |
|---|---|
| Cylinder: | Multi-cylinder |
| Fuel: | Diesel |
| Start: | Electric Start |
| Part Number: | 612600190993/1000964807 |
| Brand: | Weichai |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Product Series.
Weifang Stahl: WD615, WD618WD12 series.
Weifang Deutz 22B series.
Weifang medium-speed engine: 6160, 6170, CW/200 series.
Weifang Polise State: WP4, WP6, WP7WP10, WP12, WP13 series.
Weifang Huafeng: 295, 2100, 495, 4100, 4102, 4105, 4108, 6105, 6110, 6113, 6126 series and other diesel engine parts.
Product Category.
Cylinder body, crankshaft, connecting rod, cover, valve, valve seat, all kinds of gears, four sets, oil seals, gaskets, air filters, machine filters, diesel filters, fuel injectors, belts, axle shafts, starter, generator, booster high-pressure oil pumps, water pumps, compressors, flywheel, camshafts, rings, rocker arms, oil cooler, gear room, tensioner pulley, valve tappets, steering pumps, tanks, engine repair kits and other kinds of wear and tear parts.
Common automobile oil filter element model comparison table is as follows:
1, BL1000046758 oil filter element JX0816L;
2, BL1000053555 fuel fine filter CX1021L;
3, BL1000053557 fuel coarse filter PL420L;
4, BL1000053558 water removal assured filter element PL420L1;
5, BL1000747688 fuel coarse filter element CX1016L;
6,BL1001314852 oil filter element JX1014L;
7,BL1001362236 fuel coarse filter element RTHO-0916S;
8, BL1001362240 fuel fine filter element RTHO-0919S1;
9, BL610800070015 oil filter element JX1023C1;
10, BL61080080333 fuel fine filter element CX0810B5;
11, BL611600070119 oil filter element RTHO-11175;
12, BL612600081335Z water removal assured filter assembly (with heater oil cup) PL420R;
13, BL612630080088Z diesel crude filter element assembly (with sensor oil cup) PL420C;
14,BLDZ96259191017 Air filter element assembly K3045PU;
15,BLDZ96259191790 Air filter element assembly KFP1943;
16,BLDZ97259191047 filter element assembly KEP4428;
17,BLDZ98149190836 air filter element assembly K2540PU;
18, BLDZ98149190875 air filter element assembly K2238PU;
19,BY61000070005-SQ spin-on oil filter element assembly JX0818;
20,BY612600081334 Fuel Filter CX0814A;
21, BY612600081335-SQ water removal assured filter PL420 assured filter;
22, BY612630010239-SQ oil filter core JX1016;
23, BY612630080087-SQ diesel fine filter element CX1023;
24,BY612630080088-SQ diesel fuel coarse filter element PL420 coarse filter;
25, BY612630080203-SQ fuel crude filter element CX1016A;
26, BY612630080205-SQ fuel crude filter element CX1016B;
27, BY614080739-SQ fuel fine filter element C0813A2.
Jinan Guohua Green Power Equipment Co.,Ltd(JNGH),is a high-tech sales &service company of Jinan Diesel Engine Co., Ltd. Established in 2010,JNGH has formed a complete system in sales and after-sales of 190 series engine(jichai brand:6L190,8V190,12V190.16V190) after eight years experience.
Main business scope:
Early stage:Consultation,designation, supply and erection of engine-based power plants,including diesel generator,natural gas generator,coal gas generator and biogas generator.
Mid stage:Parts supply of jinan diesel engine(jichai/chidong brand).JNGH has two warehouses.One located in Jinan which supply the domestic north and south market.One located in Xinjiang province which supply the west market.Thus could delivery parts fast and guarantee the quality.
Later stage:JNGH also offer engine overhaul and maintenance service.With experienced engineer and professional skills,the problems could be easy solved.Not only the domestic China,Ghana,Kazakhstan,Vietnam and Myanmar also could see the trace of JNGH.
Jichai 190 cylinder head parts is one of the main parts of the diesel engine, its working conditions are harsh, the use of high requirements, the performance and reliability of the diesel engine have a great impact. For this reason, it is required to pay close attention to its working condition in the process of use, and regular inspection and maintenance.
1. Frequently check the lubrication condition of the rocker arm mechanism. When the diesel engine is running at low speed after starting or when it is pre-feeding pump oil before starting, open the upper cover of the cylinder head and observe whether there is oil overflow at the rocker arm bushing, and if it is found that there is no oil, it should be disassembled and cleaned immediately and clean the throttle valve at the oil pipe of the diesel engine on the machine body.
2. Strictly prevent the valve from sticking phenomenon. After the phenomenon of sticking in the valve, if start the diesel engine directly, it is easy to have an accident. Sticky phenomenon in the low temperature environment or poor oil quality is most likely to occur. Therefore, in the low temperature environment before starting the diesel engine, must be warmed up, so that the oil and cooling water temperature rises to more than 20C. Before starting must also manpower disk crankshaft I 2 weeks, no abnormal phenomena before starting. Should not be used in the process of long idling.
3. Check the cylinder head frequently for air, oil and water leakage. If leakage is found, check whether the cylinder head nut is loose, and tighten it evenly according to the specified torque if necessary. If the leakage phenomenon can not be eliminated, should check the relevant parts of the gasket is damaged, if necessary, replace the new parts.
4. Check the cooling condition of the cylinder head, the use of cooling water quality should be in strict accordance with the requirements, so as not to cause the cylinder head cooling waterway scaling and clogging. If the cylinder head temperature is found to be too high, should be removed from the cylinder head back to the mouth of the elbow connection, check whether there is serious scaling or clogging phenomenon, if necessary, should be cleaned up, dredging, so as not to cause poor cooling cylinder head, cooling "dead zone", causing valve sag and other malfunctions.
5. Regular testing and adjustment of valve lash
| 5 | Oil seal of the three-way fuel filter valve Сальник 3-х ходового клапана топливного фильтра | 12V.10.22 |
| 6 | () Fuel filter element (felt)Элемент топливного фильтра (войлочный) | 12V.10.30.03 |
| 7 | Bushing rubber Втулка | 12VB.01.05 |
| 8 | Ram insert Рамовый вкладыш (пара) | 12VB.01.23A/24A |
| 9 | () Shell pin (pair)Вкладыш шатуна (04А/05А;04/05) (пара) | 12VB.05.10.04С/05С |
| 10 | Gasket Прокладка | 224L2.09.02 |
| 11 | Gasket Прокладка | 224L.22.04A |
| 12 | Gasket Прокладка | 224L.22.04A1 |
| 13 | Dowel pin Установочный штифт | 12VB.05.10.07 |
| 14 | () Thrust liner Упорный вкладыш (пара) | 12VB.01.21A/22A |
| 15 | Thrust plate Упорная пластина | 223.01.25 |
| 16 | (P9,)High pressure fuel pump (Type P9, complete with regulator) ТНВД Тип Р9 (в сборе с регулятором) 206LC.13P.12P.11P-GJ (для B6190ZLCZA-2R 1000 об/мин.) | 206LC.13P.12P.11P-GJ |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}